Drawings and 3D Modeling using AutoCAD Architecture 2022

About Drawings and 3D Modeling using AutoCAD Architecture 2022

Introduction

First Concepts

User Interface Part 1

User Interface Part 2

User Interface Part 3

Create and Open a File

Introduction to the Options in AutoCAD Architecture

Drawing Limits

Drawing Setup

Save a Drawing

Create a Template

Navigation Options Part 1

Navigation Options Part 2

Standard Selection

Starting with the Draw Panel

Polar Tracking and Orthographic Mode

The Coordinates System

Status Bar Customization

The Line Tool or Command

The Polyline and The Spline Tools or Commands

The Circle and The Donut Tools or Commands

The Arc Tool or Command

The Rectangle and The Polygon Tools or Commands

The Ellipse Tool or Command

Introduction to The Hatch, Gradient and Boundary Tools or Commands

The Construction Line and The Ray Tools or Commands

The Point, The Multiple Points, The Divide and The Measure Tools or Commands

The Helix Tool or Command

Starting with the Modify Panel

The Move Tool or Command

The Copy Tool or Command

The Rotate Tool or Command

The Stretch Tool or Command

The Mirror Tool or Command

The Scale Tool or Command

The Grip

The Grip Snaps and Snap Mode

The Object Snaps

Drawing The Grid and The Walls (Drawing Exercise)

Introduction to The Layers

Using The Layers Panel

Editing The Layers from The Plot to The New VP Freeze

Using Layer States and other tools or commands on the Layers Panel

Editing The Layers of the Drawing (Drawing Exersice)

Introduction to The Grids

The options of The Column Grid tool or command

Editing The Grid

Adding Labels to The Grids

Using the Properties Palette on The Grids

Using The Grid tool or command (Tool Palettes)

Creating a Custom Grid using Linework

Using the Enhanced Custom Grid tool or command

Creating The Grid (Course Project)

Placing A Wall

The options of The Wall tool or command

Using the Properties Palette on The Wall

Other options of The Wall tool or command

The Wall tool or command on The Tool Palettes

Changing The Height of the top of The Wall

Reversing the direction of a wall

Tools from The Modify Panel while selecting the wall

Adding a Wall Sweep to The Wall

The Modify Panel while editing the wall sweep

The Wall Sweep Options that affect the Wall

Adding The Wall Sweep to the walls with multiple Wall Components

Placing An Opening

The options of The Opening tool or command

Using the Properties Palette on The Opening

Other options of The Opening tool or command

The Opening tool or command on The Tool Palettes

Using The Anchor Panel on The Openings

Using The Profile Panel for The Openings

Adding The Walls and The Openings (Course Project)

Changing The Scale

Changing The Detail Level

Changing The Global Cut Plane

Changing The Elevation Offset

Placing The Slab

The options of The Slab tool or command

Using the Properties Palette on The Slabs

Other options of The Slab tool or command

The Slab tool or command on The Tool Palettes

Adding The Slabs

Placing A Roof Slab

The options of The Roof Slab tool or command

Using the Properties Palette on The Roof Slabs

Other options of The Roof Slab tool or command

The Roof Slab tool or command on The Tool Palettes

Placing A Roof

Using the Properties Palette on The Roof

The options of The Roof tool or command

The Roof tool or command on The Tool Palettes

Convert a Roof into Roof Slabs

Changing The Slope

Changing The Shape of The Roof

Adding The Roof

Changing The Shape by using The Grips

Changing The Slaps by using The Modify Panel

Adding A Dormer to The Roof

Changing the Display Order

Using the Object Viewer

Isolate Objects and Edit in Section

Using the Sections

Using The Options when creating Sections

Using the Live Sections

Placing A Ceiling Grid

The options of The Ceiling Grid tool or command

Using the Properties Palette on the Ceiling Grid

Using the Ceiling Grid Tab

The Ceiling Grid tool or command on The Tool Palettes

Adding The Ceilings

Placing A Stair

The Shapes and Turns of The Stair

The options of The Stair tool or command

Using the Properties Palette on The Stair

Editing the Floor Settings and the Flight Height of The Stair

Other options of The Stair tool or command

Using the Calculations Rules Window

Custom Edge on The Stair

Using The Stair Landing to Anchor Objects

Adding the Stringers

Changing the Stair Components

Changing the Landing Extensions

Using the Convert to Custom Option or Tool

The options or Tools on The Custom Stair Panel (Edit Tread Riser)

The options or Tools on The Custom Stair Panel (Match Tread Riser)

The options or Tools on The Custom Stair Panel (Set to Tread Landing)

The options or Tools on The Custom Stair Panel (Replace Stringer Path)

Using Apply Tool Properties to on The Design Tool Palettes

Stair Example

Creating a Multistory Stair

Placing A Railing

Using the Properties Palette on the Railings

Changing the Rail Location

Changing the Post Locations

Changing the Railing Extensions

Editing the Railing Styles

Changing the Attachment of The Railings

Other options of The Railings

The Anchor Panel (Railing)

The Post Panel (Railing)

Editing The Profiles of The Railing

Adding The Stair and The Railings (Course Project)

Placing A Curtain Wall

The options of The Curtain Wall Unit tool or command

Using the Properties Palette on the Curtain Walls

Using Apply Tool Properties to on The Design Tool Palettes (Curtain Wall)

Editing The Roof or Floor Line Using The Profile Panel

Editing The Roof or Floor Line Using The Modify Panel

Editing The Roof or Floor Line Using The Roof and Floor Line panel

Placing A Curtain Wall Unit

Using the Properties Palette on the Curtain Walls Unit

Start and End Miter

Placing A Door

The options of The Door tool or command

Placing A Window

The options of The Window tool or command

Placing A Corner Window

The options of The Corner Window tool or command

Adding The Doors and The Windows

Using the Properties Palette on the Doors, Windows and Corner Window

The options of The Doors, Windows and Corner Windows tool or command

Placing A Door and Window Assembly

Using the Properties Palette on the Door and Window Assembly

The options of The Door and Window Assembly tool or command

The Door and Window Assembly or command on The Tool Palettes

Adding The Door and Window Assembly

The Anchor Panel (Door, Window and Corner Window)

Editing The Profile (Doors, Windows and Corner Windows)

The Modify Panel (Doors, Windows and Corner Windows)

Editing the Profiles on the Curtain Walls

Changing the Mullion Assignment

Changing the Frame Assignment

Modifying the Frames and Mullion Assignment

The Grids and Divisions

Changing the Division Assignment

Editing the Divisions

Using Convert to Manual

Using the Infills

Using Infills on Curtain Walls

Adding an Infill using the Style Properties Window

Editing the Curtain Walls using the Cells

The Project Browser

The Project Navigator

Adding the Levels

Adding the Constructs

Creating Views using the Project Navigator

Managing the Views using the Project Navigator

Creating a Project base on a Drawing Part 1

Creating a Project base on a Drawing Part 2

Creating a Project base on a Drawing Part 3

Creating a Project base on a Drawing Part 4

The Single Line Text Tool or Command

Editing the Text using The Text Panel

The Multiline Text Tool or Command

Placing The Dimensions

Using The Standard Dimensions

The Options of The Dimensions

Creating a New Style

Using The Components (The Walls)

Using The Offsets (The Walls)

The Priority and The Cleanups (The Walls)

Using The Components (The Slaps)

Using The Design Rules (The Slaps)

Using The Profiles (The Slaps)

Editing The Roof Edges

Using The Winder Types

Creating The Door Styles

Creating The Window Styles

Creating The Opening Endcaps

Creating The Wall Endcap Styles

Creating The Door and Window Assembly Styles