Learn Siemens S7-300 PLC, Simatic Manager Step 7 & WinCC HMI

About Learn Siemens S7-300 PLC, Simatic Manager Step 7 & WinCC HMI

Automation Play brings you an interactive and practical online certified course on Siemens S7-300 PLC with excellent content and hands on experience for beginners as well as professionals. This course covers the basics of Simatic Manager and S7-300 PLCs

_(I'd suggest for absolute beginners to do Siemens TIA Portal course first if they have no knowledge of PLCs)_

I designed this course for beginners as well as professionals to enable them learn PLC Programming on Siemens PLC using Simatic Manager. S7-300 is old legacy system but still in place in many industries. I have covered S7-1200 and S7-1500 latest series in depth in other courses as well. For this course you don’t need hardware at all and i'll provide Siemens PLC software which works for 12-Days (trial version) along with Factory I/O (30-days version). However, i’ll cover hardware as well for students who wish to practice on S7-300 PLCs themselves. The course will cover basic concepts of PLC programming, hardware and interfacing techniques to groom students in the field of Industrial Automation. The course will teach students PLC Programming techniques based on Siemens. I’ll be using S7-300 PLC hardware just to enable students understand the hardware configuration, wiring and troubleshooting concepts however mostly we will be using simulation mode.

Course Content

Course Overview: Introduction and Objectives

Introduction to Siemens PLC

Siemens PLC S7-300 Hardware and Software Setup (Simatic Manager Step 7 v5.5, PLCSIM v.5.4 and WinCC Flexible)

PLC Software;s: Simatic Manager Installation, Activation and Simulation

Simatic Manager Complete Overview

Siemens S7-300 PLC Wiring / Hardware Configuration and MPI Communication

PLC Wiring: Source/Sink – Discrete Devices – Analog Devices

Programming with Ladder Logic

Programming with Functional Block Diagram

Programming with STL

Programming – Relay Logic and Bit Logic Instructions (NO/NC/OUT/Set/Reset/Inv and more)

Programming – Timers / Counters / Move / Jump & Label Instructions

Programming – Comparator’s / Maths / Convert Instructions

Programming – Analog Scaling / Un-Scaling Instruction

Programming – Creating your own functions / function blocks (FC/FB)

Programming – Real Time Applications

Factory I/O – 3D Factory Automation Applications

PLC – Diagnostics and Troubleshooting (Diagnostic Buffer / Monitor Table / CPU Faults)

WinCC HMI - Software Installation and Simulation

WinCC HMI - Basic and Advanced Elements

WinCC HMI - Alarms and Recipes

WinCC HMI - Data Trends

Bonus Content: Introduction toSiemens TIA Portal and S7-1200 PLC

Software's

Siemens Simatic Manager and PLC SIM (PLC) -TrialFactory I/O (For Real Time Factory Automation) – Trial

Deliverable

Training LecturesFree Software’s – TrialLifetime Access to the course

Learning Outcomes

Intermediate knowledge about PLCs and HMIsHands on Programming ExperienceUnderstanding and implementation of Industrial Automation SystemsUnderstanding of multiple PLC Programming Languages (Ladder/FBD/STL)

Further Details:

Students can enroll in Siemens S7-1200, TIA Portal and WinCC or Siemens WinCC SCADA course afterwardsCourse are available on Automation Play