MPLS on MikroTik with LABS

About MPLS on MikroTik with LABS

MPLS is a protocol that runs inside the ISP networks. Deploying MPLS is always a challenge because of its complexity. However, MPLS has a much better performance than any other routing protocol because it works on Labels for the routing decision and it works on layer 2.5 instead of layer 3 as other routing protocols such as RIP, OSPF and BGP. Using MPLS, the ISP will be able to have a lot of benefits from feature that it provides such as Layer 3 VPN using VRF, Layer 2 VPN using VPLS, Traffic Engineering Tunnels and much more. In this course, I will go through MPLS from scratch, so I am going to explain to you what MPLS is exactly and how it works, then i am going to start doing labs to cover all topics possibles in MPLS. Topics that I am going to cover in this course are:

Introduction to MPLS

MPLS Basics, MPLS Labels and MPLS Filtering

MPLS Layer3 VPN - VRF

MPLS Layer 2 VPN - VPLS

MPLS Traffic Engineering All the course will be based on hands-on LABS, so by end of the course you will have a big understanding of how to deploy MPLS in your ISP using MikroTik Routers. To be able to follow this course, you can use GNS3 because in some LABS we require to have up to 7 MikroTik Routers. Of course if you have those routers than you can deploy them and work on physical routers to to the LABS. Finally, If you have to master MPLS on MikroTik and understand how it works, I highly advise you to register in my course and get all the information that i am going to share with you.